1.Change engine oil and filter. Clean magnetic drain plug and install new O-ring
2.Inspect oil lines and brake system for leaks, contact or abrasion
3.Inspect air cleaner; service as needed
4.Inspect tires, tread depth and adjust pressure
5.Change primary chaincase lubricant. Clean magnetic drain plug and replace O-ring
6.Change transmission lubricant. Clean magnetic drain plug and replace O-ring
7.Check clutch adjustment
8.Check level and condition of clutch fluid
9.Inspect drive belt and sprocket; adjust belt
10.Inspect compensator sprocket isolators for wear at each rear tire change
11.Check and lubricate brake and clutch controls; adjust as needed
12.Inspect and lubricate jiffy stand
13.Inspect fuel lines and fittings for leaks, contact or abrasion
14.Inspect brake fluid sight glass
15.Inspect brake pads and discs for wear
16.Check operation of electrical equipment and switches
17.Lubricate steering head bearings
18.Inspect windshield bushings
19.Check air suspension pressure, operation and for leakage
20.Lubricate hinges and latches on fuel door, Tour-pak carrier and saddlebags
21.Check torque on critical fasteners
22.Inspect, clean and tighten battery connections. Check voltage
23.Inspect exhaust system for leaks, cracks, and loose or missing fasteners or heat shields
24.Road test to verify component and system functions